Pipe Stress Analysis Notes 19/25

May 19, 20202 min read

3.0 Modeling And Analysis Of The Piping System

The first two sections of these pipe stress analysis notes have served to give the user an overview of the requirements of pipe stress...

3,294 views

May 19, 20201 min read

2.1.3 Pressure Design of Flanges and Blanks

Pressure design of flanges is a complex task, requiring consideration of the configuration and materials of the flange, bolts, and...

744 views

May 18, 20201 min read

2.1.2 Pressure Design of Elbows and Miters

When using elbows, the minimum wall thickness after bending shall not fall below that calculated for straight pipe. For mitered elbows,...

507 views

May 17, 20202 min read

2.1.1 Minimum Wall Thickness Requirements

Since hoop pressure stresses are approximately twice as large as longitudinal pressure stresses, pipe wall thicknesses are initially...

1,774 views

May 17, 20201 min read

2.1 Designing For Sustained Loads — Pressure

All piping systems must be designed to withstand sustained loadings. Sustained loads are classified as those caused by mechanical forces...

1,192 views

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES