#ASMEB313Course 5/8

Jul 10, 20171 min read

ASME B31.3 Quality Factors

Quality factors are used in pressure design and, in addition for castings, design for occasional loads and displacement stress range....

5,895 views0 comments

Jul 10, 20173 min read

ASME B31.3 Allowable Stress

The Code provides allowable stresses for metallic piping covered by the base Code and Chapter VHI (Category M) based on criteria listed...

Jul 10, 20171 min read

ASME B31.3 Design Minimum Temperature

The design minimum temperature is required to determine the impact test requirements of ASME B31.3. As the temperature is decreased, the...

1,199 views0 comments

Jul 10, 20171 min read

ASME B31.3 Calculation of Wall Temperature for Refractory-Lined Pipe

In lines for high-temperature fluid solids (e.g., in fluid catalytic cracking units), it is sometimes necessary to calculate the metal...

1,065 views0 comments

Jul 10, 20172 min read

ASME B31.3 Design Temperature

Design conditions in ASME B31.3 are specifically intended for pressure design. The design pressure and temperature are the most severe...

6,570 views0 comments

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES