#EngineeringServices 5/7

Sep 20, 20206 min read

3.6.1 Consideration of Cold Spring

Cold spring is the process of offsetting (or pre-loading) the piping system with displacement loads (usually accomplished by cutting...

2,552 views

Sep 18, 20203 min read

3.5.4 Use of CNODES When Modeling Restraints

As discussed elsewhere in these seminar notes, CNODES (short for connecting nodes) are used with a restraint whenever a point in the...

2,669 views

Sep 17, 20204 min read

3.5.3.1 Use of the Structural Steel Modeler

Elements of structural steel members may be incorporated into the model of the piping system through the use of the structural steel...

413 views

Sep 15, 20204 min read

3.5.3 Evaluation of Restraint Stiffness

In Section 2.3.3 of these seminar notes the significant effect that restraint stiffnesses may have on the piping system was described....

2,012 views

May 31, 20203 min read

Licensed Professional Canadian Piping Stress Engineer

Little P.Eng. for Engineering Services proudly presents its Licensed Professional Canadian Piping Stress Engineers; Located in Calgary Alber

2,279 views

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES