#flangedesign

Aug 6, 20171 min read

ASME B31.3 Pressure Design of Blind Flanges

Most blind flanges are in accordance with listed standards, such as ASME B16.5. When designing a blind flange, the rules of ASME BPVC...

1,362 views

Aug 5, 20171 min read

ASME B31.3 Pressure Design of Flanges

Most flanges arc in accordance with listed standards, such as ASME B 16.5, and for larger flanges, ASME B 16.47. Appendix L is provided...

1,854 views

Jun 29, 20174 min read

Behavior of the Flanged Joints System

Joint Stiffness It is important to recognize that the individual components of flanges, gaskets, nuts, and bolts operate together as a...

3,095 views

Jun 29, 20171 min read

Flange Specification and Identification

Flange Specification and Identification A flange is specified by the following information: Type and Facing. The flange is specified...

3,209 views

Jun 29, 20172 min read

Flange Faces

Flange Faces There are five types of flange faces commonly found. The surface finish of the faces are specified in the flange standards....

2,672 views

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES