Blog Little P.Eng. for Engineering Services across Canada and USA

Jun 6, 20204 min read

2.4.6 Notes on Hanger Design

In the event that a system which carries a fluid with a specific gravity less than 1.0 is to be hydro tested, the springs will generally...

Jun 6, 20204 min read

2.4.5 Restraint Placement Using Distance to First Rigid Criteria

If the above procedure is followed exactly, it is likely that almost all support locations will show some vertical movement, and will...

Jun 5, 20202 min read

2.4.4 Hanger Design Process — Restrained Weight, Free Thermal, and More

The procedures described above assume that the hot load and thermal movement required for spring selection are already known. How does...

Jun 5, 20202 min read

2.4.3 Hanger Selection Table

Springs are selected from a table such as that shown in Figure 2-31. This table shows the load capacities within the working ranges of...

1,477 views0 comments

Jun 5, 20202 min read

Pipe Stress Analysis Engineering Firm

Little P.Eng. engineering provides and performs pipe stress analysis for various industries, which are related to piping, Oil, gas energy &a

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES