Pipe Stress Analysis Freelance | Little P.Eng.| Little P.Eng. for Engineering Services [(Structural/Piping/Seismic/Material Handling/Storage Tank/Pressure Vessels) Design/CRN Registration] | https://static.wixstatic.com/media/f3609c_d03c7550ae0843749d51222a5416b71b~mv2.jpg 11/22

Jul 11, 20203 min read

3.3.1 Expansion Joint Stiffnesses

Each particular combination of material, thickness, and convolution geometry has a different axial spring rate (per convolution)...

5,911 views0 comments

Jun 26, 20202 min read

3.3 Expansion Joint Modeling And Evaluation

Expansion joints are used when it is necessary to provide a large amount of flexibility in a small space. Expansion joints are...

Jun 26, 20204 min read

3.2 Piping Configuration Modeling Techniques in CAESAR II

Piping may be modeled in varying detail, depending upon how much accuracy is required. This section looks at the various ways (providing...

2,878 views0 comments

Jun 10, 20206 min read

3.1 Computer Representation Of Basic Elements in CAESAR II

Pipe stress analysis computer software algorithms are based upon certain assumptions. These assumptions serve to make the computer model...

Jun 9, 20204 min read

2.5.3 Quickly Applied Loads [ Fluid Hammer, Relief valves ]

Loads that are applied near-instantaneously, and then remain constant for a reasonable duration of time, such as fluid hammer and reUef...

1,751 views0 comments

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES