Pipe Stress Analysis Freelance | Little P.Eng.| Little P.Eng. for Engineering Services [(Structural/Piping/Seismic/Material Handling/Storage Tank/Pressure Vessels) Design/CRN Registration] | https://static.wixstatic.com/media/f3609c_d03c7550ae0843749d51222a5416b71b~mv2.jpg 9/22

Aug 5, 20201 min read

3.4.1.3 API 617 Standard for Centrifugal Compressors in CAESAR II

The requirements of this standard are identical to those of NEMA SM23, except that all of the NEMA SM23 allowables are increased by 85%....

Jul 21, 20204 min read

3.4.1.2 API 610 Standard for Centrifugal Pumps in CAESAR II

Analysis of pump nozzle loads is covered by API Standard 610 "Centrifugal Pumps for General Refinery Service". The requirements of the...

9,616 views0 comments

Jul 20, 20203 min read

3.4.1.1 NEMA SM23 Standard for Steam Turbines

NEMA Standard SM23 requires that steam turbines be evaluated by two sets of simple force / moment calculations. The two types of...

9,712 views0 comments

Jul 15, 20202 min read

3.4.1 Equipment Nozzle Load Analysis in CAESAR II

The most accurate means of evaluating a piece of equipment for anticipated nozzle loads is to perform a test. In lieu of a test, the next...

1,952 views0 comments

Jul 13, 20202 min read

3.4 Piping Nozzle Evaluation in CAESAR II

Often piping configurations that are acceptable by stress criteria are limited by the loads which they place on connected equipment and...

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES