Pipe Stress Analysis Hand Calculations | Little P.Eng.| Little P.Eng. for Engineering Services [(Structural/Piping/Seismic/Material Handling/Storage Tank/Pressure Vessels) Design/CRN Registration] | https://static.wixstatic.com/media/f3609c_d03c7550ae0843749d51222a5416b71b~mv2.jpg 11/21

Jun 7, 20203 min read

2.5.2 Earthquake Loading in Piping Stress Analysis

Earthquakes may be analyzed using either dynamic or static methods. Dynamic earthquake analyses, which will be covered in depth later,...

4,276 views0 comments

Jun 7, 20203 min read

2.5.1 Wind Loading in Piping Stress Analysis

Wind loading is caused by the loss of momentum of the wind striking the projected area of the piping system. The static linear force per...

5,585 views0 comments

Jun 7, 20202 min read

2.5 Designing For Occasional Loads (Static Equivalent of Dynamic Loads)

As noted earlier, piping systems must be designed to withstand primary and secondary loadings. Sustained loads were discussed as being...

Jun 7, 20206 min read

2.4.7 CAESAR II Hanger Design Control and Options

CAESAR II provides a number of user specified options for controlling its automatic hanger design. The control options may, for the most...

1,948 views0 comments

Jun 6, 20204 min read

2.4.6 Notes on Hanger Design

In the event that a system which carries a fluid with a specific gravity less than 1.0 is to be hydro tested, the springs will generally...

LITTLE P.ENG. FOR ENGINEERING CONSULTANCY SERVICES