The engineering services of a healthcare facility support the delivery of patient care and help to maintain a healing and safe environment. Engineering services are integral part of hospital infrastructure
Engineering services account for approximately 35-40% of the capital costs in the construction of health care facilities. The requirement for the healthcare design is that it facilitates high quality patient care for the most cost effective capital and recurrent cost. Engineering services have large contribution towards shaping the environment of care. The goal of Environment of Care is to provide a safe, functional and supportive environment for patients, staff and visitors. The environment of care is composed of the building, the equipment and the people
Engineering services of a hospital include:
The civil assets - Includes:
Building, Roads, Storm Water Drainage, Waste water drainage, Sewage Treatment Plant
Electricity supply
Water supply including plumbing and fixture
Steam supply
Acoustics and Lighting
Piped medical gas and vacuum system (PMGV)
Air conditioning and refrigeration – Lifts, pneumatic tube system and dumbwaiters
Public health services
Solid Waste Disposal System
Communication system, paging, CCTV
Building management system
Workshop facilities for repair and maintenance
Our Hospitals Mechanical Engineering Services:
Designing mechanical systems that balance comfort, cost, efficiency, and aesthetics requires a team effort. We see ourselves as the facilitator of that team — it’s our job to understand the needs and constraints of the project and then apply our experience to guide the team towards the solution that’s right for them. While our approach is grounded in fundamentals and in physics, it’s ultimately more about people than problem solving. It’s a process that’s helped us to create thousands of places for people to thrive over the years, and it’s one that we’re excited to share with you on your next project.
SERVICES
Heating, Ventilation & Air Conditioning
Temperature & Controls
Heating & Chilled Water Systems
Utilities
Alternate Fuel Sources
District Steam/Chilled Water Systems
Clean Rooms/Laboratory Design
Indoor Air Quality
Humidification Control
Our Hospital Plumbing Engineering Services:
Plumbing systems are the unsung hero of any building. Our plumbing experts are ready to assist you with the design of reliable systems at any scale. Starting at the earliest stages, we focus on tailoring the design to meet your unique requirements. The results are efficient and reliable systems that can stand the test of time.
SERVICES
Potable Water Service
Service Water Heating
Sanitary & Storm Systems
Natural Gas Systems
Medical Gas Systems
Compressed Air Design
Sustainable Plumbing Solutions
What sets our mechanical engineering services and structural engineering services apart is the high value we place on partnering with our clients to provide the structural engineering solutions and mechanical engineering solution that best fits them and their specific project. We don’t believe in a “one-size-fits-all” approach; our ability to listen drives our design excellence. Meena Development LTD. mechanical engineers and structural engineers strive to understand each owner’s needs early in a project, then use their vast experience to identify a mechanical engineering solution that best fits those unique needs. Our mechanical engineers and structural engineers work closely with facility staff to integrate their design standards and equipment preferences into the solution, while also identifying value-added options for consideration when we deem appropriate. We work closely with the architect to document key elements that might impact engineering design, avoiding surprises later in the project.
Previous Hospitals Engineering Services projects and scope of work:
Scope of work:
Prepare piping analysis and drawing package for the following systems
Piping lines listed below running through the "Connector" bridge building.
Glycol Supply/Return
Fan Coil Drains
Domestic Cold Water
Chilled Supply/Return
Low Pressure Steam
Rainwater Leader
Steam Condensate
Analysis to factor in the following displacements and loads:
Connector Specific Building movements at building expansion joints
Thermal movement of the piping system between Ambient and Operating
Dead/gravity loads of piping system and insulation
Seismic loads
Designs to be compliant with:
NBCC Section 4.1.8.18 for post-disaster buildings
ASHRAE Bracing guidelines for non-structural components
Project Specifications below:
- Client's Mechanical Systems Pipe and Pipe Fittings
- Client's Expansion Fittings and Loops for Mechanical Systems
- Client's Pipe Hangers and Supports for Mechanical Systems
- Client's Noise & Vibration Control
- Client's Piping and Equipment Insulation
- Client's Seismic Force Restraint System
- Client's Steam and Condensate Piping and Pumps
Drawings to provide the following:
Piping Support Locations and support type (rigid, spring)
Piping Anchor locations and anchor type (Lateral, all-directional, etc)
Piping guide locations and guide type (lateral, etc)
Transverse / longitudinal seismic Bracing locations. Piping to be braced at distance maximums provided by ASHRAE / NBCC Section 4.1.8.18
Piping Expansion Joint / Flex Connector Locations (if required) and expansion joint type
Provide piping movements at expansion joints
Provide loads / movement on guides
Provide loads on supports, and travel on any spring supports
Provide loads on anchors
Provide loads on seismic bracing locations
Provide piping stress report at the analysis nodes
Physical Products and Application design (Guides, Supports, Anchors, Bracing parts and their connection to structure) to be selected/designed by others, using the information contained within the analysis/drawings (loads, movement, type, etc)
Comentários